Surface Mining Picks

Surface Mining Picks Series | High wear resistance, engineered for extreme rock conditions

Home

Surface Mining Pick Specifications

Xinda surface mining picks are engineered for open-pit stripping, rock and ore cutting, and continuous mining operations. Manufactured with ultra-coarse-grained tungsten carbide tips and high-strength forged steel bodies, they deliver reliable performance under high-impact and high-abrasion conditions. Designed to operate across a wide range of formations, from soft overburden to medium-hard and highly abrasive rock, they ensure stable cutting efficiency, reduced wear rates, and extended service life. Compatible with surface miners, continuous miners.

Ø30 mm Shank Series (6 Models)

Ø42 mm Shank Series (4 Models)

Ø35 mm Shank Series (4 Models)

Ø30 mm Shank Series（6 Models）

XDU47-S22R

Model

XDU47-S22R

Application conditions

Suitable for soft rock-medium-soft rock (UCS 30–60 MPa), e.g.,mudstone, weathered sandstone, loose limestone; low cutting resistance, high efficiency.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

22 mm

Carbide Tip Height

24 mm

Shoulder Diameter

64 mm

Shank Length

76 mm

Overall Length

147 mm

Carbide Tip Type

Bucket-type

Compatible Equipment

compatible light-duty surface miners, weathered for mations stripping equipment

XDU47-22R-K

Model

XDU47-22R-K

Application conditions

Suitable for soft rock-medium-soft rock (UCS 30–60 MPa), e.g.,mudstone, weathered sandstone, loose limestone; low cutting resistance, high efficiency.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

22 mm

Carbide Tip Height

28 mm

Shoulder Diameter

67 mm

Shank Length

78 mm

Overall Length

155 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible light-duty surface miners, weathered for mations stripping equipment

XDU47-22R-ZZ

Model

XDU47-22R-ZZ

Application conditions

Suitable for soft rock-medium-soft rock (UCS 30–60 MPa), e.g.,mudstone, weathered sandstone, loose limestone; low cutting resistance, high efficiency.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

22 mm

Carbide Tip Height

28 mm

Shoulder Diameter

70 mm

Shank Length

75 mm

Overall Length

153 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible light-duty surface miners, weathered for mations stripping equipment

XDU47-25R

Model

XDU47-25R

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

32 mm

Shoulder Diameter

67 mm

Shank Length

78 mm

Overall Length

156 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

XDU47-M25R

Model

XDU47-M25R

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

25 mm

Shoulder Diameter

64 mm

Shank Length

76 mm

Overall Length

151 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

XDU47-25R-K

Model

XDU47-25R-K

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø30 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

32 mm

Shoulder Diameter

67 mm

Shank Length

78 mm

Overall Length

156 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

Ø42 mm Shank Series（4 Models）

XD22R-42-86-1

Model

XD22R-42-86-1

Application conditions

Suitable for soft rock-medium-soft rock (UCS 30–60 MPa), e.g.,mudstone, weathered sandstone, loose limestone; low cutting resistance, high efficiency.

Shank diameter

Ø42 mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

22 mm

Carbide Tip Height

28 mm

Shoulder Diameter

86 mm

Shank Length

77 mm

Overall Length

167 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible light-duty surface miners, weathered for mationss tripping equipment

XD25M-42-80

Model

XD25M-42-80

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø42 mm

Wear-resistant layer configuration

None (no wear layer)

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

34 mm

Shoulder Diameter

80 mm

Shank Length

77 mm

Overall Length

159 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

XD25CC-42-86-1

Model

XD25CC-42-86-1

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø42 mm

Wear-resistant layer configuration

CC-type super wear-resistant protection layer

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

32 mm

Shoulder Diameter

86 mm

Shank Length

77 mm

Overall Length

167 mm

Carbide Tip Type

Straight-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

XD25MCC-42-80K

Model

XD25MCC-42-80K

Application conditions

Suitable for medium-hard rock (UCS 50–80 MPa), e.g.,sandstone, dolomite, moderate abrasiveness rock; Suitable for moderate high-intensity continuous cutting.

Shank diameter

Ø42 mm

Wear-resistant layer configuration

CC-type super wear-resistant protection layer

> Expand detailed parameters

Carbide Tip Diameter

25 mm

Carbide Tip Height

34 mm

Shoulder Diameter

80 mm

Shank Length

86 mm

Overall Length

159 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible medium-duty surface miners, continuous mining / stripping equipment

Ø35 mm Shank Series（4 Models）

XDU170-M30R

Model

XDU170-M30R

Application conditions

Suitable for hard rock and moderate abrasion rock (UCS 70–120 MPa), e.g.,granite, basalt, siliceous rock; long service life impact resistance excellent performance.

Shank diameter

Ø35mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

30mm

Carbide Tip Height

38 mm

Shoulder Diameter

68mm

Shank Length

133 mm

Overall Length

223 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible heavy-duty surface miners, high-power continuous mining equipment

XDU170-M35C

Model

XDU170-M35C

Application conditions

Suitable for hard rock and highly abrasive rock (UCS 70–120 MPa), e.g.,granite, basalt, siliceous rock; long service life impact resistance excellent performance.

Shank diameter

Ø35mm

Wear-resistant layer configuration

C-type super wear-resistant protection layer

> Expand detailed parameters

Carbide Tip Diameter

35mm

Carbide Tip Height

42 mm

Shoulder Diameter

65mm

Shank Length

133 mm

Overall Length

224 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible heavy-duty surface miners, high-power continuous mining equipment

XDU170-M35R

Model

XDU170-M35R

Application conditions

Suitable for hard rock and moderate abrasion rock (UCS 70–120 MPa), e.g.,granite, basalt, siliceous rock; long service life impact resistance excellent performance.

Shank diameter

Ø35mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

35mm

Carbide Tip Height

42 mm

Shoulder Diameter

65mm

Shank Length

133 mm

Overall Length

224 mm

Carbide Tip Type

Mushroom-type

Compatible Equipment

compatible heavy-duty surface miners, high-power continuous mining equipment

XDU170-35R

Model

XDU170-35R

Application conditions

Suitable for hard rock and moderate abrasion rock (UCS 70–120 MPa), e.g.,granite, basalt, siliceous rock; long service life impact resistance excellent performance.

Shank diameter

Ø35mm

Wear-resistant layer configuration

R-type plasma cladding wear-resistant layer

> Expand detailed parameters

Carbide Tip Diameter

35mm

Carbide Tip Height

40 mm

Shoulder Diameter

65mm

Shank Length